|
|
|
| Effect of dentine porcelain and glaze on relative translucency of A, D color IPS e.max LT core material |
| ZHANG Liang1, FENG Lu2, ZHAO Chunpeng3, and SUN Ting4 |
1.Second Outpatient Department, Army General Hospital of PLA, Beijing 100125, China;
2. Department of Stomatology, Beijing Dongzhimen Hospital, Beijing 100007, China;
3. Department of Stomatology, Hospital of Corps 8640, Chinese People’s Armed Police Force, Dingzhou 073000, China;
4. The Medical Centre of Stomatology, the First Affiliated Hospital of Jinan University, Guangzhou 510630, China |
|
|
|
|
Abstract Objective To evaluate the effect of dentine porcelain and glaze on relative translucency of A, D color IPS e.max LT core material. Methods 160 disc-shaped base material IPS e.max LT samples with thickness of 0.3 mm and 0.5 mm were made, and divided to 8 groups by color number A1, A2, A3, A3.5, A4, D2, D3, D4, n=5. Same color dentin porcelain was decorated in surface, with thickness of 0.3 mm. Finally, all samples were glazed and sintered. Relative translucency was determined with spectral colorimeter after glazing and sintering, and statistically analyzed. Results Effect analysis Results of A color samples showed that both thickness and glaze were significant factors on relative translucency (P＜0.001), and there was interaction between them (P＜0.001). Effect analysis Results of D color samples showed that both thickness and glaze were significant factors on relative translucency (P＜0.001), and there was no interaction between them (P=0.472). Color series was not a relevant factor for relative translucency (P=0.153 and 0.525). There was no interaction between color series and thickness, between color series and glaze. There was no interaction among the three factors. Conclusions Decoration, glaze are important impact factors with a greater on relative translucency of A, D color IPS e.max LT core material, so that positive attention should be given in clinical practice.
|
|
Received: 20 May 2016
|
|
|
|
|
|
| [1] |
李 莉,刘晓艳. 饰面瓷厚度对IPS e.max全瓷修复体颜色及透射率的影响[J]. 基层医学论坛, 2014, 18(25): 3319-3322.
|
| [2] |
刘晓艳,韩 影,白乐康. 上釉对IPS e.max全瓷修复体颜色及透射率的影响[J]. 中国美容医学, 2015, 24(24): 45-47.
|
| [3] |
Nakamura T, Saito O, Fuyikawa J, et al. Influence of abutment substrate and ceramic thickness on the color of heat-pressed ceramic crowns [J]. Oral Rehabil, 2002, 29(6): 805-809.
|
| [4] |
孙迎春,刘 娟,高 平.厚度与颜色影响IPS e.max和In-Ceram全瓷修复体色彩再现效果的实验研究[J]. 口腔医学研究, 2011, 27(8): 693-695.
|
| [5] |
李 玲,邓再喜,孙 翔. 瓷层厚度对IPS e.max全瓷修复体颜色的影响[J]. 口腔医学研究, 2010, 26(6): 839-841.
|
| [6] |
Pecho O E, Ghinea R, Ionescu A M, et al. Color and translucency of zirconia ceramics, human dentine and bovine dentine[J]. J Dent, 2012, 40(Suppl 2): e34-e40.
|
| [7] |
Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses[J]. J Prosthet Dent, 2013, 110(1): 14-20.
|
| [8] |
Artopoulou I I, Powers J M, Chambers M S. In vitro staining effects of stannous fluoride and sodium fluoride on ceramic material [J]. J Prosthet Dent, 2010, 103(3): 163-169.
|
| [9] |
孙 挺. IPS E.max热铸压陶瓷材料的色度学研究[D]. 广州:南方医科大学, 2012.
|
| [10] |
农 晨,郑丹丹,孙 挺. B、C、D色系IPS E.max牙本质瓷的无限光学厚度研究[J]. 口腔颌面修复学杂志, 2015, 16(4): 237-240.
|
| [11] |
孙 挺,邵龙泉,伊元夫, 等. IPS e.max A色系牙本质瓷无限光学厚度的研究[J]. 南方医科大学学报, 2011, 31(2): 259-261.
|
| [12] |
汪琦瑛,顾 斌,温 宁, 等. 四种新型牙科基底瓷材料透射率的对比研究[J]. 军事医学, 2014, 38(7): 563-564.
|
| [13] |
Raptis NV, Michalakis KX, Hirayama H. Optical behavior of current ceramic systems [J]. Int J Periodontics Restorative Dent, 2006, 26(1): 31-41.
|
| [14] |
Fan H, Liu R Y, Jing D D, et al. Effect of Vitique Esthetic Cementation on tetracycline stained teethmask with different simulated staining levels following IPS-Empress Ⅱ ceramic veneers[J]. Key Engin Mater, 2013, 544: 105-109.
|
| [15] |
Heffernan M J, Aquilino S A, Diaz-Amold A M, et al. Relative translucency of six all-ceramic systems. Part II: core and veneer materials[J]. J Prosthet Dent, 2002, 88(1): 10-15.
|
| [16] |
周叶青, 顾新华. 全瓷材料的透明度及不同背景下色度学变化的实验研究[J]. 华西口腔医学杂志, 2014, 32(4): 409-412.
|
|
|
|
2016, Vol. 27 
