单翼马里兰桥修复上颌中切牙缺失1例的有限元分析

Abstract
Figure/Table
References
Related Citation (2)

Download: PDF (2147 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Objective To explore the use of cantilevered Maryland Bridge to repair the loss of maxillary anterior teeth that were not suitable for conventional implantation. Methods One case of maxillary central incisor missing, bone condition not suitable for conventional implantation and pursuing minimally invasive restoration was selected. The clinical purpose and aesthetic effect of repairing missing teeth were completed by using cantilevered Maryland Bridge. Through the three-dimensional finite element model of the cantilevered Maryland Bridge of maxillary central incisor, the bridge was loaded with 100, 150 and 200 N loads respectively, and the mechanical analysis was carried out. Results When the cantilevered Maryland Bridge loaded with 100, 150 and 150 N, the maximum stress of the bridge body were 67.68, 101.53 and 135.37 MPa respectively. The stress distribution trend of maxillary central incisor cantilevered Maryland Bridge under different loads was similar, and the stress was concentrated at the junction and loading point between the bridge and the natural incisor. With the increase of load, the equivalent stress of each part increased accordingly, especially at the junction of loading point and cutting end. Conclusions The bonding strength of cantilevered Maryland Bridge should be increased at the proximal end of the natural tooth bonding surface and the occlusal contact of the bridge should be appropriately reduced.

Key words： Maryland bridge three dimensional finite element model stress distribution maxillary central incisor

Received: 24 April 2022

ZTFLH:

R783.4

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHU Xiaoyang
	XIN Guofeng
	FU Jianhong
	YU Kaitao

Cite this article:

CHU Xiaoyang,XIN Guofeng,FU Jianhong等. Finite element analysis of cantilevered Maryland Bridge in restoration of missing maxillary central incisor[J]. Med. J. Chin. Peop. Armed Poli. Forc., 2023, 34(1): 39-42.

URL:

http://journal08.magtechjournal.com/Jwk_wjyx/EN/ OR http://journal08.magtechjournal.com/Jwk_wjyx/EN/Y2023/V34/I1/39

[1]	Kern M, Knode H, Strubb J R. The all porcelain, resin-bonded bridge[J]. Quintessence Int, 1991, 22(4): 257-262.
[2]	Weng D, Ries S, Richter E J. Treatment of a juvenile patient with a maxillary all-ceramic resin-bonded fixed partial denture: a case report[J]. Quintessence Int, 2002, 33(8): 584-588.
[3]	宁江海, 高飞, 章捍东, 等. 改良式固定型马里兰桥修复老年前牙缺失的临床效果观察[J]. 解放军医学杂志, 2007, 32(4): 3.
[4]	胡建, 章非敏, 戴宁, 等. 不同厚度上颌中切牙全瓷冠应力分布的有限元研究[J]. 华西口腔医学杂志, 2012, 30(4): 356-359.
[5]	Wei Y R, Wang X D, Zhang Q, et al. Clinical performance of anterior resin-bonded fixed dental prostheses with different framework designs: a systematic review and meta-analysis[J]. J Dent, 2016, 47:1-7.
[6]	Pjetursson B E, Tan W C, Tan K, et al. A systematic review of the survival and complication rates of resin-bonded bridges after an observation period of at least 5 years[J]. Clin Oral Implants Res, 2008, 19(2): 131-141.
[7]	Gratton D R, Jordan R E, Teteruck W R. Resin-bonded bridges: the state of the art[J]. Ont Dent, 1983, 60(5): 9-11, 13-16, 18-19.
[8]	Kern M, Glaser R. Cantilevered all ceramic, resin-bonded fixed partial dentures: a new treatment modality[J]. J Esthet Dent, 1997, 9(5): 255-264.
[9]	Sasse M, Eschbach S, Kern M. Randomized clinical trial on single retainer all-ceramic resin-bonded fixed partial dentures: influence of the bonding system after up to 55 months[J]. J Dent, 2012, 40(9): 783-786.
[10]	Dundar M, Ozcan M, Comlekoglu M E, et al. A preliminary report on short-term clinical outcomes of three-unit resin-bonded fixed prostheses using two adhesive cements and surface conditioning combinations[J]. Int J Prosthodont, 2010, 23(4): 353-360.
[11]	Dalen A, Feilzer A J, Kleverlaan C J. A literature review of two-unit cantilevered FPDs[J]. Int J Prosthodont, 2004, 17(3): 281-284.
[12]	Rosentritt M, Ries S, Kolbeck C,et al. Fracture characteristics of anterior resin-bonded zirconia-fixed partial dentures[J]. Clin Oral Investig, 2009, 13(4): 453-457.
[13]	Johnston C, Hussey D L. The immediate replacement of incisor teeth by cantilevered adhesive bridgework[J]. Dent Update, 1993, 20(8): 333-334.
[14]	Saker S, Fallal A, Madina M, et al. Clinical survival of anterior metal-ceramic and all-ceramic cantilever resin-bonded fixed dental prostheses over a period of 60 months[J]. Int J Prosthodont, 2014, 27(5): 422-424.
[15]	Sailer I, Bonani T, Brodbeck U, et al. Retrospective clinical study of single-retainer cantilever anterior and posterior glass-ceramic resin-bonded fixed dental prostheses at a mean follow-up of 6 years[J]. Int J Prosthodont, 2013, 26(5): 443-450.
[16]	Sasse M, Kern M. CAD/CAM single retainer zirconia-ceramic resin-bonded fixed dental prostheses: clinical outcome after 5 years[J]. Int J Comput Dent, 2013, 16(2): 109-118.
[17]	Gutmann J L. The origin of the Maryland bridge[J]. J Hist Dent, 2019, 67(2): 110.
[18]	Moon S Y, Lim Y J, Kim M J, et al. Three-dimensional finite element analysis of platform switched implant[J]. J Adv Prosthodont, 2017, 9(1): 31-37.
[19]	刘佳怡, 何雨桐, 汪振华. 有限元分析法在口腔修复学中的应用进展[J]. 医学综述, 2019, 25(16): 5.
[20]	Eraslan O, Eraslan O, Eskitascioglu G, et al. Conservative restoration of severely damaged endodontically treated premolar teeth: a FEM study[J]. Clin Oral Investig, 2011, 15(3): 403-408.
[21]	Barink M, Mark P C, Fennis W M, et al. A three-dimensional finite element model of the polymerization process in dental restorations[J]. Biomaterials, 2003, 24(8): 1427-1435.
[22]	Jiang W, Bo H, Yongchun G,et al. Stress distribution in molars restored with inlays or onlays with or without endodontic treatment: a three-dimensional finite element analysis[J]. J Prosthet Dent, 2010, 103(1): 6-12.
[23]	Yokoyama D, Shinya A, Gomi H, et al. Effects of mechanical properties of adhesive resin cements on stress distribution in fiber-reinforced composite adhesive fixed partial dentures[J]. Dent Mater J, 2012, 31(2): 189-196.
[24]	Toman M, Toksavul S, Sabanci S,et al. Three-dimensional finite element analysis of stress distribution of two-retainer and single-retainer all-ceramic resin-bonded fixed partial dentures[J]. Quintessence Int, 2015, 46(8): 691-696.