3D打印技术在医疗救援中的应用

Abstract
Figure/Table
References
Related Citation (14)

Download: PDF (642 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Objective To manufacture a model or an auxiliary medical appliance by 3D printing technology,to make diagnosis and treatment of medical rescue process intuitive,convenient and accurate. Methods Using the 3D printing device of MRI system and FDM technology, the thermoplastic material under the control of the computer, the rapid production of various dies and auxiliary medical appliances. Results Using the 3D printing device equipped in a vehicle with mounted MRI system can not only make the RF receiving coil mould, also can be applied to the medical rescue in preoperative planning, intraoperative navigation, customized operation auxiliary instrumentand, and custom-made prosthesis in actual rescue scene. Conclusions 3D printer as matching equipment of MRI system plays an important role in the clinical diagnosis and therapy in the rescue scene.

Key words： three-demensional printing vehicular MRI system medical rescue RF receive coil

Received: 06 May 2014

ZTFLH:

R821.15

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Zhichao
	YANG Jiong
	WANG Xiaofeng
	and LIU Haifeng

Cite this article:

LIU Zhichao,YANG Jiong,WANG Xiaofeng等. 3D printer as fixed equipment of MRI used in medical rescue[J]. Med. J. Chin. Peop. Armed Poli. Forc., 2014, 25(12): 1202-1204.

URL:

http://journal08.magtechjournal.com/Jwk_wjyx/EN/ OR http://journal08.magtechjournal.com/Jwk_wjyx/EN/Y2014/V25/I12/1202

[12]	张志昌,郑稼,张新胜,等.3D打印技术在创伤骨科中的应用[J].河南医学研究,2014,23(3):160-161.
[1]	笪熠,陈适,潘慧,等.3D打印在医学教育中的应用[J].协和医学杂志,2014,5(2):234-237.
[2]	Rengier F,Mehndiratta A,Tengg-Kobligk H,et al.3Dprinting based on imaging data:reviewof medical applications[J].Int J Comput Assist Radiol Surg,2010,5:335-341.
[13]	何兴容,杨永强,吴伟辉,等.粉碎性骨折个体化手术模板的选区激光熔化直接成型研究[J].生物医学工程学杂志,2010,3(8):519-523.
[14]	Bagaria V,Deshpande S,Rasalkar D D,et al.Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures[J].Eur J Radiol,2011,80(3):814-820.
[3]	赵阳.3D打印技术及应用[J].电脑知识与技术,2013,9(6):1536-1538.
[15]	Alberti C.Three dimensional CT and structure models [J].Br J Radiol,1980,53(627):261-262.
[4]	周伟民,闵国全,李小丽.3D打印医学[J] .组织工程与重建外科杂志,2014,10(1):1-3.
[5]	管吉,杨树欣,管叶,等.3D打印技术在医疗领域的研究进展[J].中国医疗设备,2014,29(4):71-73.
[16]	Tonner H D,Engelbrecht H.A new method for the preparation of special alloplastic implants for partial replacement of the pelvis[J].Fortschr Med,1979,97(16):781-783.
[6]	张文燕.3D打印医学未来[J].中国医院院长,2013,12(12):60-62.
[17]	刘云峰,徐俊华,董星涛,等.实现精确种牙的现代设计与制造技术[J].机械工程学报,2010,46(5):150-157.
[7]	Arvier J F,Barker T M,Yau Y Y,et al.Maxillofacial biomodeling[J].Br J MaxillofacSurg,1994,32:276-283.
[8]	刘志超,杨炯,王晓枫,等.车载式磁共振成像系统的研制[J].中国医学装备,2014,11(5):40-43.
[18]	Christian H, Matthieu K,Jean-Luc B, et al.Rapid prototyping in craniofacial surgery:Using a positioning guide after zygomatic osteotomy e A case report[J].J Cranio-Maxillo-Facial Surg,2011,39:22-35.
[9]	杨成才.延长磁共振线圈使用寿命的方法技巧[J].临床工程,2011,26(11):78-79.
[10]	Bianchi S D,Ramieri P P.The validation of stereolithographic anatomical replicas:the authors own experience anda review of the 1iterature [J].Radiol Med(Torino),1997(94):503-510.
[19]	Tricot M,Duy K T,Docquier P L.3D-corrective osteotomy using surgical guides for posttraumatic distal humeral deformity[J].Acta Orthop Belg,2012,78(4):538-542.
[11]	李珈萱,赵梦雅.3D打印技术助力临床医学的发展[J].电脑知识与技术,2013,32(9):7323-7326.
[12]	张志昌,郑稼,张新胜,等.3D打印技术在创伤骨科中的应用[J].河南医学研究,2014,23(3):160-161.
[13]	何兴容,杨永强,吴伟辉,等.粉碎性骨折个体化手术模板的选区激光熔化直接成型研究[J].生物医学工程学杂志,2010,3(8):519-523.
[14]	Bagaria V,Deshpande S,Rasalkar D D,et al.Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures[J].Eur J Radiol,2011,80(3):814-820.
[15]	Alberti C.Three dimensional CT and structure models [J].Br J Radiol,1980,53(627):261-262.
[16]	Tonner H D,Engelbrecht H.A new method for the preparation of special alloplastic implants for partial replacement of the pelvis[J].Fortschr Med,1979,97(16):781-783.
[17]	刘云峰,徐俊华,董星涛,等.实现精确种牙的现代设计与制造技术[J].机械工程学报,2010,46(5):150-157.
[18]	Christian H, Matthieu K,Jean-Luc B, et al.Rapid prototyping in craniofacial surgery:Using a positioning guide after zygomatic osteotomy e A case report[J].J Cranio-Maxillo-Facial Surg,2011,39:22-35.
[19]	Tricot M,Duy K T,Docquier P L.3D-corrective osteotomy using surgical guides for posttraumatic distal humeral deformity[J].Acta Orthop Belg,2012,78(4):538-542.