Turkyilmaz I, Wilkins G N. 3D printing in dentistry - Exploring the new horizons[J]. J Dent Sci, 2021, 16(3):1037-1038.
[4]
Ghai S, Sharma Y, Jain N, et al. Use of 3-D printing technologies in craniomaxillofacial surgery: a review[J].Oral Maxillofac Surg, 2018, 22(3):249-259.
[5]
Khorsandi D, Fahimipour A, Abasian P, et al. 3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications[J]. Acta Biomater, 2021, 122(3):26-49.
[6]
de Sales M C, Florez R M, da Silva G J, et al. Guided surgery with 3d printed device: a case report[J]. J Oral Implantol, 2021, 47(4):325-332.
Lee J S, Park T H, Ryu J Y, et al. Osteogenesis of 3D-Printed PCL/TCP/bdECM scaffold using adipose-derived stem cells aggregates; an experimental study in the canine mandible[J]. Int J Mol Sci, 2021, 22(11):5409.
[10]
Derksen W, Wismeijer D, Flügge T, et al. The accuracy of computer-guided implant surgery with tooth-supported, digitally designed drill guides based on CBCT and intraoral scanning:a prospective cohort study[J]. Clin Oral Implants Res, 2019, 30(10):1005-1015.
Wu P, Hu L, Li H, et al. Clinical application and accuracy analysis of 3D printing guide plate based on polylactic acid in mandible reconstruction with fibula flap[J]. Ann Transl Med, 2021, 9(6):460.
Smeets R, Barbeck M, Hanken H, et al. Selective laser-melted fully biodegradable scaffold composed of poly(d,l-lactide) and β-tricalcium phosphate with potential as a biodegradable implant for complex maxillofacial reconstruction: In vitro and in vivo results[J]. J Biomed Mater Res B Appl Biomater, 2017, 105(5):1216-1231.
[16]
Ahn G, Lee J S, Yun W S, et al. Cleft alveolus reconstruction using a three-dimensional printed bioresorbable scaffold with human bone marrow cells[J]. J Craniofac Surg, 2018, 29(7):1880-1883.
[17]
Hu F, Pei Z, Wen Y. Using Intraoral scanning technology for three-dimensional printing of kennedy class i removable partial denture metal framework: a clinical report[J]. J Prosthodont, 2019, 28(2):e473-e476.
Prpic V, Schauperl Z, Catic A, et al. Comparison of mechanical properties of 3D-printed, CAD/CAM, and conventional denture base materials[J]. J Prosthodont, 2020, 29(6):524-528.
Tahayeri A, Morgan M, Fugolin A P, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials[J]. Dent Mater, 2018, 34(2):192-200.
[23]
Lee W S, Lee D H, Lee K B. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system[J]. J Adv Prosthodont, 2017, 9(4):265-270.
Della B A, Cantelli V, Britto V T, et al. 3D printing restorative materials using a stereoli- thographic technique: a systematic review[J]. Dent Mater, 2021, 37(2):336-350.
[26]
Kim S Y, Shin Y S, Jung H D, et al. Precision and trueness of dental models manufactured with different 3-dimensional printing techniques[J]. Am J Orthod Dentofacial Orthop, 2018, 153(1): 144- 153.
Tartaglia G M, Mapelli A, Maspero C, et al. Direct 3D Printing of clear orthodontic aligners: current state and future possibilities[J]. Materials (Basel), 2021, 14(7):1799.
[29]
Jindal P, Juneja M, Siena F L, et al. Mechanical and geometric properties of thermoformed and 3D printed clear dental aligners[J]. Am J Orthod Dentofacial Orthop, 2019, 156(5):694-701.
[30]
Maspero C, Tartaglia G M. 3D Printing of clear orthodontic aligners: where we are and where we are going[J]. Materials (Basel), 2020, 13(22):5204.
[31]
Shah P, Chong B S. 3D imaging, 3D printing and 3D virtual planning in endodontics[J]. Clin Oral Investig, 2018, 22(2):641-654.
[32]
Torres A, Shaheen E, Lambrechts P, et al. Microguided Endodontics: a case report of a maxillary lateral incisor with pulp canal obliteration and apical periodontitis[J]. Int Endod J, 2019, 52(4): 540-549.
[33]
Ackerman S, Aguilera F C, Buie J M, et al. Accuracy of 3-dimensional-printed endodontic surgical guide: a human cadaver study[J]. J Endod, 2019, 45(5):615-618.
[34]
Patel S, Aldowaisan A, Dawood A. A novel method for soft tissue retraction during periapical surgery using 3D technology: a case report[J]. Int Endod J, 2017, 50(8):813-822.
2022, Vol. 33 
